Thursday, September 8, 2011

Up she goes!

Bundles of corrugated steel and buckets of bolts, a building make.
Weatherstripping on all joints keeps the water out.
Okay, kiddies, this is what a 40-foot by 50-foot Quonset hut looks like before you add water. Alright, so you don’t add water…just a few thousand bolts… and a few miles of weather-proofing tape doesn’t hurt, either.


A heavy-duty impact drill makes this step fast and easy.




Before the arches go up, the base plates must be anchored. After careful measuring, we drilled half-inch holes about 8 inches deep with a an impact drill. The anchors are half-inch by six-inch Red Head concrete anchors. They work great and can be reasonably purchased from any fastener supply dealer.





As they say: “A journey of a thousand miles begins with one step, and a Quonset hut begins with one arch”. Okay, I added that part about the Quonset hut...and it’s only partially true. A Quonset hut actually begins by bolting two sections together but the most important part of that step is identifying which two sections belong to each other.  


Keep plenty of drill batteries on hand and powered up.
To do this, it helps to have at least one member of the crew who can not only read, but has the proper motivation to do so.  They give you written instructions for a reason: to help you figure out where you screwed up after you realize the knowledge of proper Quonset hut building is NOT in your DNA!
Regardless which method and equipment you choose to raise your first arch, it is the most challenging one to put in place.
This view shows how flexible a single arch is. 
After employing the alternative strategy, I strongly urge you to READ THE INSTRUCTIONS FIRST!
Oh, another thing; Never underestimate the flexibility of a Quonset arch. The more hands you have, the better (and safer) the process will be. We thought we had what it took to get the first arch up, and we did…but my life flashed before my eyes three times before it was securely perched on the scaffold jacks. After putting our first arch up in one piece, we wisely decided to do the rest in half sections and I had no more ’life-flashes’.
Half sections were much easier to work with. This photo shows us with three-and-a-half arches up.
As you can see, things went fairly smoothly from this point, and as each arch wormed its way into place, they actually seemed to get easier. 

14 comments:

  1. It's coming along nicely...thanks for the update.

    I have two questions...

    Is the weatherstripping along the seams a manufacturer recommendation or your personal preference?

    Is something done to moisture seal the arches where they contact the base plate? Such as caulking?

    Thanks and keep the updates coming...very interesting!

    ReplyDelete
  2. I can't wait to see framing, and insulation! Are you going to run 12 volt wire for the solar? Inverters are so inefficient!

    ReplyDelete
  3. Thanks for sharing! We hope to do the same in a few years!

    ReplyDelete
  4. What happened to this blog....Did you stop working on the project ?

    ReplyDelete
  5. I really loved your blog, but it appears that you have put a lot more work into it. I will keep your blog in my twitter so I can come back and see it again when it has some new information. Good subject!

    ICF Concrete form

    ReplyDelete
  6. Hello, one minute back I was looking for the data on the same subject and now I am here. So much data, truly decently executed website. This is truly enlightening and I will beyond any doubt refer my friends the same. Thanks.....
    home builders Charleston sc

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. A great blog with an excellent step by step procedure. I am making a website that covers all about quonset huts. I want to refer this blog to my site. You can check out my site at Visit Quonset Hut Homes

    ReplyDelete
  9. What a great site! I work for a company that builds these Quonset structures and they are incredible affordable, easy to heat, and durable against everything including super high wind and rain! Visit Quonset-Hut.com

    ReplyDelete
  10. What contact adhesive did you use for the insulation?

    ReplyDelete
  11. do you know of anyone who cut the roof line, partial arch to expose more interior light. i have found examples, but nothing on how it is done or how/what to frame overhang.

    ReplyDelete

  12. Thank you for your post. This is excellent information. It is amazing and wonderful to visit your site.
    upvc windows suppliers
    top upvc windows dealers in hyderabad

    ReplyDelete

  13. Its a very nice and informative article, Thank you for sharing this topic. visit:- Ace Divino

    ReplyDelete
  14. Ace Divino Very great and available task for the ones folks that need to live lifestyles like high-priced it's miles to be had by you at very appealing price.It is giving you a ground plan of 2/3/four BHK with many more centers. If you have any Query visit Now:- Ace Divino floor plan

    ReplyDelete