Waterproofing the Base Plate

One of the few frustrating things about our Quonset is water leaks. The shell itself is engineered to be completely watertight. But, as with most well-planned projects, reality has a way of challenging the ideal. After checking all the bolts and tightening a few, we were able to seal all but a couple of leaks. The remaining few were due mainly to small tears in the metal at the bolt holes caused by over-stressing the skin in an effort to line up holes. After we made these mistakes a couple of times we realized our errors and corrected them. But the damage was done. 

      Our biggest problem was sealing leaks at the base, where the shell meets the concrete and where it ties into the base plate. We were advised to fill the void created by the shell meeting the channel with concrete, which we did. We also used a heavy application of caulking between the base plate and the concrete. In spite of this, when it rained, we had an indoor pool. We then caulked all around the concrete where it met the metal. It still leaked. We then coated the whole area with water-stop concrete, a kind of latex/cement material that is supposed to seal concrete and bond to metal…it still leaked. We caulked again…to no avail.

      In desperation, I started researching ways to solve our problem and came across a company called Hydro-Stop, out of Charleston, SC. Their website (http://www.Hydro-Stop.com) was intriguing and the concept looked promising. It seemed like a lot of work, but we were desperate. I contacted the company, told them of our problem, they invited us to visit and see for ourselves.  Hydro-Stop is one of those small companies (not yet regulated into oblivion) that offer a great product and excellent service. We met with Perry Smith, Charleston Plant Superintendent, and he gave us the tour. Fast-forward, we took home two buckets of Hydro-Stop sealer, a roll of fabric, and a bucket of color coating. The rest follows:

     Here’s our culprit. 

This is the base filled with concrete, caulked, then coated with water-stop concrete.

I decided to make a pattern and cut out pieces of the reinforcing fabric for each base juncture. 

My pattern was made of cardboard and I used a razor knife to cut each piece of fabric to fit the base plate shape.

Since the product is water base, it is very easy to work with and clean up after. 

Manufactured in Charleston, SC, Hydro Stop is shipped all over world for guaranteed, cost-effective waterproofing.

I simply brushed on a generous coat of Hydro-Stop sealer.

'Generous coat' means enough to bind the fabric to the cement.

While it was still very wet, I laid in the piece of pre-cut fabric.

The pre-cut fabric pieces made the job much neater and quicker.

I then coated and saturated the fabric with more sealer making sure the fabric was completely covered and no raw fabric showed through.

This process works very much like hand-layup fiberglass--except much easier and with no smell!

Making sure any air bubbles were pressed out and the fabric was completed covered with sealer; I gave it one final coat to smooth out the fabric texture.  

The polyester fabric is very easy to work with and soaks up the Hydro Stop readily.

Voila!

The finished job. Neat, clean, and effective. Our second phase of water/air-proofing the shell will overlay the top edge of our base covering.

      We have yet to apply the final color coat, but even after a tropical storm and several heavy rains, we leak no more! All in all, the process went quite smoothly. It took 10-12 minutes to seal each cavity. With 25 cavities per side, it took less than six hours to complete the project. The best part is—we now have a water-proof Quonset!

      Using Hydro-Stop to solve one problem has given us the solution to another problem. Since we plan to use the skin of our Quonset to provide us with cost-free air circulation, we need our structure to be air-tight as well. Our next Hydro-Stop project is to seal our entire shell with the same system we used on our base. Another bonus: we want to change the color of our Quonset, plus give it extra protection against the elements. With minimal preparation, Hydro-Stop bonds so well to the GalvaLume surface; it is an excellent coating for metal.

      Using the Hydro-Stop system, we can seal each joint, making our building completely water and air tight, plus, we can add color to the entire structure!

Craving Structure - Part 2

Now that we have an outer 'envelope' we begin on the inner structure: another more heavily-insulated box designed to meet specific needs. Our box is eight feet tall, 12 feet wide and attaches to the end walls making it approximately fifty feet long.

 

Metal wall studs mount to a track anchored to the concrete slab.

The outer wall is set about 10" inside the Quonset wall to allow for the roof curve which begins at about five feet above the slab. 

Track runs about 10" inside Quonset wall to allow for roof curve.

End column shows how wall and roof curve comes together.

In our plan we chose not to insulate between the rooms. All plumbing and electrical is standard design. The ventilation is custom designed for our passive system.

Using traditional materials in nontraditional ways keeps our costs down and allows us to find bargains otherwise not available.

Interior walls go up.

All exterior walls have 3" insulation making each room within the structure very cost-effective to heat or cool. Heavy-duty rafters provide ample storage space above.

An 18-inch overhang allows additional storage space without compromising floor space.

 Our plan to use LED lighting makes wiring and electrical fixtures easy to obtain and accommodate.

Craving Structure - Part 1

Although an 'envelope' structure's inner and outer skins are largely independent, they are connected at doors and windows and may have other connecting elements.

Commonly referred to as an 'envelope' structure, this type of construction may be accomplished with almost any system: pole barn, traditional metal building, or Quonset. It is essentially a building with independent inner and outer skins.

Furring strips applied to the Galvalume arches.

In our application, The outer skin features 3/4" EPS insulation glued to 1"x 4" EPS furring strips. The big challenge here was finding an adhesive that would hold the EPS to the Galvalume but not cavitate (melt) the EPS.

The furring strip gives a good base for mounting the EPS panels while solving the problem of dealing with the Quonset bolts. This method also adds about 12 square inches to each 'ducts' cross section.

After much research and trial and error, we located a company that produces a contact-type adhesive that works flawlessly.

Contact adhesive is applied to the 4' x 16' x 3/4" insulation panels and pressed into place.

After a few minutes drying time, the insulation panels can be installed.

The bottom run of panels complete, we are ready to start the second run. Note the open space at the bottom.

We used 3/4"-thick panels to allow a smooth fit inside the curved Quonset arches.

EPS panels easily form to the curve of the Quonset Hut arches.

Space at the bottom of the panels is left open to allow cooler, moist air to be pulled into the ventilation 'ducts' and lifted to the exhaust plenum at the roof ridge along the top of the building.

This photo gives an excellent illustration of the 'duct' formed by the Quonset ridge and the EPS insulation.

Water Management

Water run-off quickly fills the channel and leaks into the building.

One unique challenge with a Quonset is water-proofing the base. If left as constructed, the U-Channel base plate will catch and hold water as it runs off the roof, and, trust me, a lot of water runs off the roof! There are two problems with handling the water: first, diverting the water away from the channel; and second, stopping the water from running between the channel and the slab. When the base plates were put down, grout was used between the channel and the concrete. 

Concrete fill is a cheap, quick, and easy way to divert the run-off away from the base.

After the arches were erected the pockets were filled with concrete. It’s important to coat the Galvalume Quonset panels with a protectant before the concrete is put into place. To simplify the concrete application, we put Sakrete in dry, then poured water over the top. This way it is easier to deal with, rather than having to mix a bag for each pour.  

After the concrete sets, a good quality caulk helps seal the joint between the concrete and the Galvalume skin.

After the pockets were filled with concrete, the edges were caulked and a thin coat of water-proof cement was troweled over it. After the water-proof cement cured we used concrete sealer over it all for good measure.

The Beginning of the Ends

My apologies for the delay in posting. We’ve made good progress in spite of a two-month recovery from a fall that resulted in torn ligaments in both shoulders. It’s difficult to do construction work when you can’t raise your arms above waist-high. But I digress. 

The front of the Quonset has two bi-fold doors.

The photos will tell the story of where we are.  Both ends are up and waiting for the trim and finish. When complete, the whole building will be insulated. Both end walls are paneled with Hardi-board and have 3” insulation. The bi-folds are fourteen feet tall and sixteen feet wide. They were custom built on site using heavy-duty metal studs. The hinges are roller bearings and they ride on 3” heavy duty rollers. This route was chosen because a commercially-available door of the same size is four to five times the cost. 

The back of the building has a single four-by-eight foot door.

The rear access door is also built on site, but using lighter metal studs. The two-by-six foot opening at the top on both ends is the exhaust for our passive convection air circulation system.